← Model histories

MAZ-503A

The MAZ-503A was a Group A tipper for first- and second-category roads allowing 10-tonne axle loads. A hydraulic hoist tipped its body rearwards; it had an opening tailgate and protective canopy over the cab. Minsk produced it from 1971 on the MAZ-500A platform, replacing the 7-tonne MAZ-503B based on the MAZ-500.

МАЗ-503А

Specifications truck MAZ-503A: Cab seats — 2; Wheel configuration — 4×2; Payload — 8 t.; Body volume — 5,1 m³; Engine: YaMZ-236, four-stroke diesel, Cylinders — 6, Displacement — 11,15 L, Power — 180 hp at 2100 rpm; Gearbox: manual, Ratios — 5; Final drive — bevel gears; Hub reduction — planetary; Tyre size — 11,00—20; Brakes — shoe brakes; Suspension — rigid axle, leaf springs; Dimensions: Length — 5,78 m, Width — 2,50 m, Height — 2,70 m; Wheelbase — 3,40 m; Wheel track MAZ-503A: front — 1,97 m, rear — 1,86; Kerb weight — 7,1 t, Gross weight — 15,25 t; Minimum ground clearance — 0,27 m; Body tipping angle — 55°; Loaded-body tipping time — 15 s; Turning radius at outer front wheel — 7,0 m; Braking distance from 40 km/h — 18 m; Top speed — 75 km/h; Test fuel consumption at 30-40 km/h — 22 L/100 km; Fuel consumption in service — 31 L/100 km; Fuel capacity — 400 L.
Photo: A. Vladimirov.

Source: журнал «За рулем» 1973