Estonia-18
The Estonia-18 raced in national Formula 3: a lightly tuned production engine up to 1300 cm³ and minimum kerb weight of 420 kg. Tallinn's experimental repair plant built small series for the USSR DOSAAF Central Committee from 1970. Chassis and body shared much with the Formula 2 Estonia-16M, powered by a Moskvich-412 engine. Engine, gearbox and final drive formed a unit ahead of the rear wheels. A backrest at 50° to horizontal gave a reclining driving position and reduced frontal area.
Equipment included rack-and-pinion steering, cast magnesium wheels, fibreglass bodywork, a fire-extinguishing system and rebound-adjustable telescopic dampers. The unsynchronised gearbox came with 17 gear pairs for tailoring ratios to the circuit.
Specifications racing car «Estonia-18»: Seats — 1; Engine: model — VAZ-2101, Cylinders — 4, Displacement — 1198 cm³, Power — about 70 hp at 6000 rpm; Gears — 4; Final-drive ratio — 4,12; Tyre size: front — 6,50—13, rear — 7,50—13; Rim width: front — 190, rear — 230; Brake type — discs with separate circuits; Brake disc diameter: front — 250, rear — 240 mm; Suspension — independent, coil springs; Frame — tubular spaceframe; Dimensions Estonia-18: Length — 4,05 m, Width — 1,68 m; Wheelbase — 2,35 m; Wheel track — 1,42 m; Turning radius at outer front wheel — 4,75 m; Maximum front-wheel steering angle — 29 degrees; Kerb weight — 520 kg; Rear-wheel weight share — 57%; Top speed — 190 km/h; Braking distance from 172 km/h to rest — 120 m; Fuel capacity — 40 L.
Photo: T. Zhebrauskas.
Source: журнал «За рулем» 1974