KamAZ-5511
By late 1977, bright yellow KamAZ dump trucks were appearing on building sites and in quarries around Naberezhnye Chelny. Model 5511 production began on 11 October 1977. KamAZ built the chassis, while Neftekamsk fitted the body and tipping gear. The design was developed with engineers from the Mytishchi machine-building plant.
The three-axle 6×4 tipper carried 10 tonnes of loose construction or industrial materials on roads allowing axle loads of 8 tonnes or more. Most major components were shared with other KamAZ models.
Like related models, it used advanced features for its time: asymmetric headlights to reduce dazzle and hazard flashers activating all indicators together. The two-seat all-metal cab over the engine tilted forward to 42° and 60° and had a laminated windscreen. The separate sprung driver’s seat adjusted for weight and height; belt mountings were provided.
The welded steel bucket body, with protective canopy, widened slightly towards the rear for unloading and could be exhaust-heated. Locking pins in the tipping brackets secured it when raised. An adjustable safety cable prevented excessive tipping, with a spring stowing it during travel. A welded subframe of pressed longitudinal and crossmembers attached through ties and brackets. The hydraulic hoist comprised a power take-off, oil pump and tank, control valve, cylinder, lift-limiting valve, three electropneumatic valves and oil and air lines.
The single-speed power take-off drew drive from the gearbox and was controlled electropneumatically from the cab. A three-stage telescopic cylinder pivoted between the front subframe and upper front body wall. At 60°, the cylinder housing pressed the limiting valve’s rod. Raising a loaded body at 2200 engine rpm took no more than 19 seconds; lowering the empty body took 18 seconds.
Specifications model KamAZ-5511: general data - Wheel configuration - 6×4; Payload - 10 t; Body volume 7.2 m³; Speed - 80 km/h. Dimensions: overall length - 7100 mm; width across rear tyres - 2500 mm; Track front wheels - 2010 mm: rear track - 1850 mm; Wheelbase from front axle up to middle axle - 2840 mm; Wheelbase rear bogie - 1320 mm; Height at body canopy - 2700 mm. Engine: diesel model KamAZ-740; Cylinders - 8; Displacement - 10,85 L; Power - 210 hp; rpm - 2600. Transmission: Gears - 5 or 10 (with splitter); Final drive - two-speed; Tyres - 260-508R model IN-142B. Controls: Brake actuation air-over-hydraulic; Hydraulic power steering.
Source: журнал «За рулем»