← Model histories

Ural-4320

In 1978 Ural built the first industrial batch of Ural-4320 trucks with KamAZ’s four-stroke 210 hp model 740 diesel. It improved pulling power, speed and economy: top speed reached 85 km/h, operating fuel consumption fell by more than 30% and maintenance labour by 10.8%. Freight transport became more efficient than with the carburetted predecessor.

The proven Ural-375D thus became the basis for a second generation with better technical and economic performance. Its ability to work in varied road and climatic conditions mattered especially across Siberia, the Far North and Central Asia.

Compared with the petrol ZIL-375, the KamAZ-740 produced 30 hp, or 16%, more power at 19% lower speed. Peak torque rose 14% and occurred at 15% lower rpm. Gear ratios changed, with final drive reduced from 8.90 to 7.32. Fuel, cooling, exhaust and electrical systems, frame, clutch actuation, front suspension and other parts were revised. The new unit was 280 kg heavier, increasing front loading and improving weight distribution and soft-ground ability. The Ural-375D carried 3865 kg on the front axle and 9335 kg on the bogie; the Ural-4320 figures were 4350 and 9075 kg.

Урал-4320

Safety improved through split service brakes, an auxiliary engine brake and system warning lamps. Ergonomics benefited from a new dashboard and instrument cluster and strap-type cushioning in the seat. The more comfortable seat adjusted for height, fore-and-aft position and backrest angle. A stronger heater, better control layout and batteries moved outside the cab further improved working conditions.

It retained permanent all-wheel drive, first introduced domestically by Ural on a 6×6. With a centre differential, this improved torque distribution and reduced transmission material requirements. The driver could lock the differential by lever for marsh, snow or sand. Single tyres, equal track on every axle and central tyre-pressure control were retained.

Proven design solutions and the powerful diesel gave better off-road performance and speed than the previous base model. Externally, the Ural-4320’s grille sat farther forward: the KamAZ-740 was longer than the ZIL-375 and required a longer engine bay.

Technical summary Ural-4320: general data: Wheel configuration 6×6. Kerb weight - 8440 kg. Payload - 5000 kg. Trailer weight - 7000 kg. Top speed - 85 km/h. Test consumption at 40 km/h - 27 L/100 km. Fuel capacity - 270 L.
Dimensions. Length - 7366 mm. Width - 2500 mm. Height (to canvas top) - 2870 mm. Loading height - 1420 mm. Wheelbase front to middle axle - 3525 mm and 1400 mm rear bogie. Track - 2000 mm all wheels. Ground clearance - 400 mm. Engine: Cylinders - 8. Compression ratio - 17,0. Displacement - 10 850 cm³. Power - 210 hp at 2600 rpm. Peak torque - 65 kgf·m at 1500—1800 rpm. Transmission: Clutch - dry twin-plate. Gearbox - five-speed. Transfer case - two-speed with asymmetric lockable centre differential. Front axle permanently driven. Final drive - double-reduction (cylindrical and spiral-bevel gears). Front-wheel constant-velocity joints - discs. Controls: hydraulic power steering. Brakes: service drums on all wheels with split hydropneumatic actuation; mechanical transmission-drum parking brake; auxiliary exhaust butterfly brake.
Running gear. Front suspension - rigid axle with longitudinal semi-elliptic leaf springs and telescopic dampers. Rear suspension - rigid equalising suspension with longitudinal semi-elliptic leaf springs and radius rods. Tyres - 14.00—20. Central tyre-pressure control. Frame and body: Frame - riveted ladder type. Load platform - all-metal.

Source: журнал «За рулем»