← Model histories

ZiU-6-2M

This large 1971 bus came from the Uritsky plant, known for trolleybuses and identified by its ZiU badge. Demand for high-capacity public transport grew as cities expanded. Buses were essential because trolleybus, and especially tram, infrastructure was not always economically justified.

Established production of 120-passenger trolleybuses allowed related buses to be developed without major extra expense. The Engels plant used the ZiU-5 as its basis and sourced unfamiliar components from specialists: engines and rear axles for the ZiU-6-2M came from Hungary, automatic transmissions from Czechoslovakia.

The body, with 38 seats and two doors, was almost identical to the trolleybus. An underfloor Rába diesel drove a Praga-2M70 hydromechanical transmission with torque converter and two-speed planetary gearbox. Drive then reached the Rába rear axle with bevel final drive and planetary hub reductions. Rigid leaf-spring suspension, air-assisted steering, disc-less wheels, pneumatic drum brakes and doors closely followed trolleybus practice.

ЗИУ-6-2М

Compared with the LiAZ-677, the ZiU had 13 more seats and was 1330 mm longer, giving a turning radius of 12 m rather than 11 m. Rear doors were 100 mm narrower, but steps were lower: 320 versus 348 mm. Its diesel used 32 L/100 km against the LiAZ’s 45.

Technical summary bus ZiU-6-2M: Seats: seated - 38, maximum - 120; Kerb weight - 9380 kg; Engine: Displacement— 10 350 cm³, Power - 192 hp at - 2100 rpm; Dimensions, mm: Length - 11780, Width - 2680, Height - 3120; Wheelbase - 6100 mm; Wheel track, mm: front - 2006, rear - 1910; step height above ground - 320 mm; door opening width, mm: front - 1050, rear - 1100; Ground clearance - 180 mm; minimum turning radius - 12,0 m; Tyre size - 320-508 mm; Top speed - 75 km/h; Test fuel consumption - 32 L/100 km.

Source: журнал «За рулем»